arrow-buttonarrow-down-selectarrow-downarrow-first-pagearrow-last-pagearrow-menu-itemarrow-next-pagearrow-nextarrow-prevarrow-previous-pagearrow-scrollclipboardclosecogdownloadeditemailexelfilterflag-deuflag-engflag-fraflag-itaflag-spaflag-usalenslinklistlocklogo-negativemarkermisurepdfplaypressioneshareslider-next-arrow-2slider-next-arrow-3slider-next-arrowslider-prev-arrow-2slider-prev-arrow-3slider-prev-arrowsocial-facebooksocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetemperatura
Ball valves for gas

Athena

Application fields:
The ATHENA series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).

Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI ISO 10226).

Operation devices:
Aluminium lever, steel lever, aluminium T-handle, sealing cap.

Available colours:
yellow.

All the valves comply with the regulation 2014/68/CE and are tested 100% on pneumatic seal with electronic control.

Temperature limits
from –20°C to +60°C
Pressure limits
MOP5

• The ATHENA valve is full bore and has been designed to comply with European regulation EN331 covering gas ball valves. Thanks its construction guarantees a high working reliability at low and very low pressures, typically found in gas installations.

Bore:
full.

Stem:
anti blow out.

Seats:
high resistance virgin PTFE.

Upper seal:
3 seals
1 PTFE ring- high pressure
2 O-Ring - low pressur

• The ATHENA series complies to the regulation (UE) 305/2011 CPR (Building Material)

Temperature limits:
for gas from –20°C to +60°C

Pressure limits:
for gas MOP5

Request information